Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 50)

Configuring MPOA and NHRP Services

3-4

305861-A Rev 00

Using the BCC

To set the MPS address generating mode, navigate to the appropriate ATM

mpoa-service and enter the following command:

autogenerate { enabled

disabled

}

With this mode enabled, the MPS automatically generates an ATM address based

on information it receives from an LECS. If you disable this mode, the MPS uses

an ATM address based on the value you configured for the network-prefix and

user-suffix parameters of the MPOA service record. (If you disable address

autogeneration, be sure to configure values for network-prefix and user-suffix.)

For example, on a System 5000 router, the following commands:

• Navigate to the mpoa-service on ATM interface atm/5/3/1 on a System 5000

router.

• Disable ATM address autogeneration.

stack#

atm/5/3/1

atm/5/3/1#

mpoa-service/5/3/1

mpoa-service/5/3/1#

autogenerate disabled

Using Site Manager

To set the MPS address generating mode, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

MPOA Server Attributes

. The MPOA Service Record window

opens.

4. Set the

MPS Address Generate Mode

parameter. Click on

Help

or see the

parameter description on page A-3.

(continued)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 147 148

Comentarios a estos manuales

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring MPOA Services