Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 108)

Configuring MPOA and NHRP Services

B-2

309249-14.00 Rev 00

MPOA Service Record Parameters

This section describes the parameters for configuring an MPOA service record

(mpoa-service).

Parameter: autogenerate

Path: box or stack > atm > mpoa-service

Default: enabled

Options: enabled

disabled

Function: Specifies whether the MPS is enabled to automatically use the ATM network

prefix value it receives from the network switch. If you disable autogeneration,

the MPS derives ATM network prefix from your manually configured values for

MPOA service parameters network-prefix and user-suffix.

Back to “Setting the MPS Address Generating Mode” on page 3-3.

Parameter: network-prefix

Path: box or stack > atm > mpoa-service

Default: None

Options:

000000000000000000000000 to

FFFFFFFFFFFFFFFFFFFFFFFF

= 39, 45, or 47

Function: Used only when ATM address autogeneration is disabled, the network prefix

specifies the ATM domain of which any MPOA server (MPS) will be a member.

The router uses the MPOA service address information as a base when creating

a new MPS. (See also the definition for the autogenerate parameter.)

The

byte must be 39, 45, or 47. This value defines the authority and format

identifier (AFI). The AFI byte identifies the group responsible for allocating the

prefix and the format the prefix uses. For more information about the AFI byte,

see the ATM Forum UNI specification.

The router configures the network prefix automatically with address

autogeneration enabled.

Back to “Specifying an MPS Control ATM Address” on page 3-5.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 147 148

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 108