
10-44 Error Codes
Troubleshooting
7102 Serial port in use Find out what else could be
using the Serial port. If nothing
is, try restarting the Connection
Server. Refer to
“Troubleshooting” in this
chapter.
7103 Serial port failure Make sure the data module or
wallboard is securely plugged in.
Refer to “Troubleshooting” in
this chapter.
7104 Serial port lost carrier. Make sure the data module
connection to the DEFINITY
system is intact. Refer to
“Troubleshooting” in this
chapter.
7105 Receive buffer overrun BCMS Vu recovers from this
problem automatically. If it
occurs frequently, try adjusting
the buffer speed through
Start/Settings/Control
Panel/System/Device
Manager/Com Port/Port
Settings/Advanced. See
“Resolving Problems” on page
10-2.
7106 Serial receive error Check that the serial port
connection is securely attached.
Retry the connection.
7107 Transmit Buffer overrun See receive buffer overrun
(7105).
7108 Serial transmit error See serial receive error (7106).
7109 Could not communicate with
device.
Be sure the data module or
wallboard is securely plugged in.
ID Description Resolution
Comentarios a estos manuales