Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario descargar pdf (Pagina 82)

82 Hunt Group configuration

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

Attention: A linear hunt group DN assigned as the overflow telephone does not

support having the hunt group DN assigned as an Answer DN to any hunt group

member. If this occurs, the Answer DN does not ring at the hunt group telephone

when an overflow condition occurs. If the hunt group DN overflow telephone whether

assigned as an Answer DN to a non-group member, ensure that the Answer key for

your system is set to Extended. • Aux. Ringer: If an external ringer is installed,

indicate if the hunt group calls use it (select check box). • Distinct Ring: Define if

incoming hunt calls have a different ring than other calls received by the member.

Attention: If you assign a distinctive ring pattern for a Hunt Group, all calls offered

to telephones in the group use the assigned ring pattern. If no pattern is assigned,

or if the ring pattern is lower in status than the ring pattern of the line or the telephone

setting, the call uses the ring pattern with the highest status setting. Refer to the

sections that describe configuring Lines and DNs for information about assigning

distinctive ring patterns to lines and telephones.

--End--

Variable Definitions

Variable Value

HG This number identifies the hunt group to the system. This is also

the number assigned to the telephone, when you add the

telephone as a Hunt Group member. <01-30>

Name Enter a logical name that describes the group function. This

name also acts as calling line display for incoming calls.

DN Add a DN. The DN number can be assigned to memory buttons

on telephones that are not part of the hunt group.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 257 258

Sin comentarios

Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario Pagina 82