Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario descargar pdf (Pagina 80)

80 Central answering positions configuration

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

6 Select the Set DN field and type the DN for the telephone.

--End--

Programming CAP/KIM buttons

Use the following tasks to program CAP/KIM buttons.

• Programming module buttons (page 80)

Programming module buttons

Designating features or autodial numbers to the eKIM buttons can be

performed using the CAP/KIM Button Programming panel.

Procedure steps

Step Action

1 Click Configuration > Telephony > Sets > Active Sets.

2 Click the Capabilities and Preferences tab.

3 Select the DN for the CAP you want to configure.

4 In the lower panel, click the CAP/KIM Button Programming tab.

5 Select the line for the button number that you want to program.

6 Configure the feature or autodial on the button.

You cannot assign lines, target lines, or Hunt group indicators using button

programming. These must be performed through assigning lines to the

telephone, and, for hunt groups, configuring the telephone as a Hunt group

member. These lines are either moved to the modules, or overflow to the

module, if the telephone buttons cannot accommodate the new settings.

You cannot assign Hunt group DNs as an autodial button on the KIM

modules.

--End--

Procedure job aid

If the 7316E+KIM is configured as an eCAP, you can move lines onto the

module using FEATURE *81 on the telephone. You can also reassign Hunt

group designators to the KIM module by using the same feature. You can also

force lines onto the KIM by assigning more lines than the telephone buttons

can support. Extra lines automatically flow over to the module; however they

flow sequentially, starting on the top left at button 01. Also, they overwrite any

existing programming on the KIM, except existing line or hunt group (KIM)

assignments. Any of the buttons, without assigned lines, can be programmed

to dial internal or external numbers automatically, or to access a feature.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 257 258

Sin comentarios

Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario Pagina 80