Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario descargar pdf (Pagina 120)

120 Set access to call answer features configuration

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

1 In Element Manager, click Configuration > Telephony > Lines > Active

Physical Lines.

2 Choose the line for which you want to assign privacy.

3 In the bottom panel, click Preferences.

4 Beside Trunk mode, choose Unspr (unsupervised).

--End--

Programming a line to automatically enable privacy

You can program some lines to make a call private automatically.

Procedure steps

Step Action

1 In Element Manager, click Configuration > Telephony > Lines > Active

Physical Lines.

2 Select the line that you want to automatically enable privacy.

3 In the bottom panel, click the Preferences tab.

4 Select the Auto privacy check box.

If the line is part of a line pool, ensure that all other lines in the pool also have

this feature enabled.

--End--

Intrusion controls configuration

If your system is part of a private network that uses the Meridian call attendant

on a centralized voice mail system, the attendant can use the break-in feature

to interrupt a call, regardless of any other settings on your line. The exception

is if you have a higher intrusion priority than the attendant. If this is the

situation, the attendant is forced to camp the call at your telephone, or redirect

the call elsewhere in the system.

Configuring intrusion controls

This feature is set on a per-telephone basis.

Procedure steps

Step Action

1 Determine the intrusion level of the attendant telephone.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 257 258

Sin comentarios

Avaya Business Communication Manager 5.0 - Configuration - Devices Manual de usuario Pagina 120