Avaya Configuring Routers Manual de usuario descargar pdf (Pagina 74)

Configuring Routers

4-8

The Conﬁguration Manager window reﬂects all circuit moves.

7. Follow Steps 1 through 6 for each circuit that you want to move.

8. Select File➔Exit to exit this window when you are done.

Changing Network Addresses on a Circuit

You can change network addresses on a circuit using the Conﬁguration Change

Utility. For information on this utility, see the section “Conﬁguration Change

Utility” in Chapter 3.

Assigning an Additional IP Address to a Circuit

Bay Networks IP routing supports Multinet, which lets you assign multiple IP

addresses to a single circuit; thus, one circuit can support multiple IP network

interfaces. Each IP address on a Multinet circuit must belong to a unique network/

subnet. You cannot have two interfaces on the same subnet.

For more information about Multinet, see Conﬁguring IP Services.

You can assign as many IP addresses as you want to a circuit. To assign additional

IP addresses to a circuit, begin at the Conﬁguration Manager window and

complete the following steps:

1. Select Circuits➔Edit Circuits.

The Circuit List window appears (Figure 4-1).

2. Select the circuit to which you want to assign an additional IP address,

and then click on Edit.

The Circuit Deﬁnition window appears (Figure 4-2).

3. Select Protocols➔Edit IP➔Interfaces.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 103 104

Sin comentarios

Avaya Configuring Routers Manual de usuario Pagina 74