Avaya Configuring Routers Manual de usuario descargar pdf (Pagina 48)

Configuring Routers

2-6

See Conﬁguring Line Services for more information.

— If you are conﬁguring an AN or ASN router, an ASYNC option appears in

the WAN Protocols window (Figure 2-2). See Conﬁguring Line Services

for more information on editing the ASYNC parameters.

If you selected the Standard, PassThru, PPP, or Frame Relay WAN protocol, the

Conﬁguration Manager displays the Select Protocols window. Go directly to the

“Enabling Bridging/Routing Services” section for instructions.

If you selected another WAN protocol, you must specify a few additional

parameters before proceeding to the “Enabling Bridging/Routing Services”

section. Depending on the WAN protocol you selected (ATM DXI, ATM FRE2,

SMDS, SDLC, or X.25), you must refer to one of the following manuals for

instructions on enabling the protocol:

• If you selected ATM DXI or ATM FRE2, refer to Conﬁguring ATM Services.

• If you selected SMDS, refer to Conﬁguring SMDS Services.

• If you selected SDLC, refer to Conﬁguring SDLC Services.

• If you selected X.25, refer to Conﬁguring X.25 Services.

Service Transparent

WAN Protocol Chosen WAN protocol

Table 2-2. Synchronous Line Parameters

Parameter Setting

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 103 104

Sin comentarios

Avaya Configuring Routers Manual de usuario Pagina 48