Avaya Configuring Routers Manual de usuario descargar pdf (Pagina 20)

Configuring Routers

1-2

Customizing Network Interfaces

After you add an interface to a router, you can use the Conﬁguration Manager to

customize it. The Conﬁguration Manager provides management access to all

parameters associated with an interface. These parameters consist of the physical-

layer (line) parameters, datalink-layer (circuit) parameters, and network-layer

(bridging/routing) parameters. You can perform the following functions:

• Edit the line parameters associated with the interface.

Conﬁguring Line

Services

describes how to edit line parameters.

• Delete and rename circuits, as well as move a circuit to another interface.

Chapter 4 describes how to perform these tasks.

• Add protocols to and delete them from the circuit associated with the

interface. Chapter 4 describes how to perform these tasks.

• Edit bridging and routing protocol parameters.

You can access these parameters on a system-wide or interface-speciﬁc basis.

Refer to the appropriate protocol-speciﬁc guide for instructions on editing

bridging and routing protocol parameters.

• Add multiple Internet Protocol (IP) addresses to a single circuit that supports

IP. Chapter 4 describes how to do this.

Specifying Router Hardware Conﬁguration

In dynamic and remote modes, the Conﬁguration Manager does not require you to

specify router hardware. In local mode, however, the Conﬁguration Manager

requires you to specify the hardware conﬁguration whenever you create a new

conﬁguration ﬁle.

See “Starting a Conﬁguration in Local Mode” later in this chapter for information

on how to specify router hardware.

Conﬁguring the Router Connection to the Technician Interface

The router’s console port connects the router to the Technician Interface. Site

Manager provides default settings for the console conﬁguration; however, you can

use the Conﬁguration Manager to access and reconﬁgure all console parameters.

Chapter 5 describes how to conﬁgure the router’s connection to the Technician

Interface.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

Sin comentarios

Avaya Configuring Routers Manual de usuario Pagina 20