
Using the Configuration Manager
1-21
When you have completed your edits in the Connections List Option window,
click on OK to implement them.
Table 1-2. Connections List Options
Option Function
Polling Enables or disables the accessibility testing of the IP addresses. If you set
this option to On, Site Manager polls the IP addresses in the Well-Known
Connections box to test whether the connections are still accessible.
Test Sample Tests one connection or all connections per poll. If you select One
Connection, each poll tests one connection on the list in sequential order.
Test Rate (secs) Specifies how frequently to poll the IP addresses to test the validity of the
connections. The default is 300 seconds.
Max. Connections Sets a maximum number of IP connections to display in the Well-Known
Connections box. Valid entries are 1 to 100. If the entry is less than the
number of connections currently in the box, Site Manager truncates the list
from the bottom.
List Label Lets you change the label (or name) of the Well-Known Connections box.
Up Label Lets you change the label indicating the status of an accessible IP address
in the Well-Known Connections box.
Down Label Lets you change the label indicating the status of an inaccessible IP
address in the Well-Known Connections box.
Ignore Label Lets you change the label indicating the status of connections to be ignored
in the Well-Known Connections box. Site Manager does not poll ignored
connections.
Sound Specifies when (if at all) the Well-Known Connections box generates a
sound. The box can generate a sound when
• A connection is down (the default).
• Polling occurs (one beep) and polling shows that a connection is down
(one beep per down connection).
• There is a change in status.
Auto Scroll Lets you specify whether you want an automatic scroll to a down
connection in the Well-Known Connections box.
Comentarios a estos manuales