Avaya Configuring Routers Manual de usuario descargar pdf (Pagina 35)

Using the Configuration Manager

1-17

Parameter: Node Name/IP Address

Default: None

Options: Valid host name or valid IP address

Function: Speciﬁes the host name or IP address of the Bay Networks router with

which you want to establish a management session.

Instructions: Enter the router’s IP address or host name. You can use the host name to

establish a management session only if it is included in the workstation’s

host ﬁle.

MIB Object ID: Not Applicable

Parameter: Identity (Community)

Default: Public

Options: Any valid SNMP community name

Function: Speciﬁes the SNMP community name you want Site Manager to use

when communicating with the router.

Instructions: Enter the SNMP community name. The community must have read-write

access to the speciﬁed router if you want to use the Conﬁguration

Manager to reconﬁgure the router.

MIB Object ID: Not Applicable

Parameter: Timeout (seconds)

Default: 10 seconds

Range: 1 to 300 seconds

Function: Speciﬁes the number of seconds Site Manager waits for a response from

the router after it issues an SNMP SET or GET before reissuing the

command.

Instructions: Enter the number of seconds.

MIB Object ID: Not Applicable

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

Sin comentarios

Avaya Configuring Routers Manual de usuario Pagina 35