Avaya Configuring Routers Manual de usuario descargar pdf (Pagina 49)

Adding Network Interfaces

2-7

Enabling Bridging/Routing Services

Once a circuit is conﬁgured, the Conﬁguration Manager displays the Select

Protocols window (Figure 2-3) from which you select the bridging/routing

protocols you want to run over that circuit.

Figure 2-3. Select Protocols Window

The window differs slightly according to circuit type, displaying only those

protocols that the circuit type supports. In addition, for certain circuit types, the

window allows you to select the protocol priority feature (refer to Conﬁguring

Trafﬁc Filters and Protocol Prioritization for instructions about conﬁguring

protocol prioritization).

To enable bridging/routing services, complete the following steps:

1. Select all bridging/routing protocols that you want to enable on the

circuit.

2. Click on OK.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

Sin comentarios

Avaya Configuring Routers Manual de usuario Pagina 49