Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 156
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
Site Manager Parameters
308623-14.00 Rev 00
A-7
Parameter: BofL Enable
Path: Configuration Manager > XCVR Connector > Edit Line
Default: Enable
Options: Enable
|
Disable
Function: When set to Enable, the router sends BofL polling messages from this system to
all systems on the local network.
Instructions: Set to Enable or Disable. We recommend that you enable BofL.
MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.7
Parameter: BofL Timeout
Path: Configuration Manager > XCVR Connector > Edit Line
Default: 5 (4 if router redundancy is enabled)
Options: 1 to 60 seconds
Function: Specifies the time between transmissions of BofL messages from this Ethernet
interface. Timeout will occur if five periods elapse without a successful BofL
message transmission. When timeout occurs, the router disables and reenables
the Ethernet interface.
This parameter is valid only if you set the BofL Enable parameter to Enable.
Instructions: Accept the default BofL timeout of 5 seconds, or specify a new value up to 60
seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.8
Parameter: BofL Retries
Path: Configuration Manager > XCVR Connector > Edit Line
Default: 5 (4 if router redundancy is enabled)
Options: 1 to 60 retries
Function: Specifies the number of BofL messages this interface can retransmit before the
router declares the circuit down.
Instructions: Either accept the default of 5 BofL retries or specify a value from 1 to 60 retries.
Use this parameter in conjunction with the BofL Timeout and BofL Timeout
Divisor parameters to decrease or increase the time it takes the router to declare
an interface down.
MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.59
Vista de pagina 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 155 156

Comentarios a estos manuales

Sin comentarios