
Site Manager Parameters
308623-14.00 Rev 00
A-17
FDDI Line Parameters
The FDDI Parameters window (Figure A-6) allows you to enable the FDDI circuit
for the selected connector, enable BofL, and enable hardware filtering.
Figure A-6. Edit FDDI Parameters Window
Parameter: Enable
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables the FDDI circuit for the selected connector.
Instructions: Set to Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.4.1.2
Comentarios a estos manuales