Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 92)

Configuring Ethernet, FDDI, and Token Ring Services

A-4

308623-14.00 Rev 00

Parameter: BofL Retries

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 5 (4 if router redundancy is enabled)

Options: 1 to 60 retries

Function: Specifies the number of Breath of Life messages this interface can retransmit

before the router declares the circuit down.

Instructions: Either accept the default of five BofL retries or specify a value from 1 to 60

retries. Use this parameter in conjunction with the BofL Timeout and BofL

Timeout Divisor parameters to decrease or increase the time it takes the router

to declare an interface down.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.59

Parameter: BofL Timeout Divisor

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 1 (10 if router redundancy is enabled)

Options: 1 to 100

Function: The time between BofL transmissions is the value of the BofL Timeout

parameter divided by the value of the BofL Timeout Divisor parameter. When

BofL Timeout Divisor is set to the default value of 1, it has no effect on the

value of BofL Timeout. Setting BofL Timeout Divisor to a value greater than 1

reduces the BofL timeout period.

Instructions: Accept the default or enter a number from 1 to 100.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.60

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 155 156

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 92