Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 41)

Configuring Ethernet Services

308623-14.00 Rev 00

2-17

Using Site Manager

To enable flow control, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose an

XCVR

Connector.

The Edit Connector window opens.

2. Choose

Edit Line

. The Edit 10/100MB/s Ethernet

Parameters window or the Edit 1000 Mb/s

Ethernet Parameters window opens,

depending on the module you selected.

3. Set the following parameters:

• Flow Control Enable

• Flow Control Pause Time

• Transmit Pause Zero Enable

Click on

Help

or see the parameter

descriptions beginning on page A-14.

4. Click on

. The Edit Connector window opens.

Note:

If the Interface Line Speed

parameter is set to Auto Negotiation, the

Auto Negotiation window opens. Click on

Done

to go to the Edit Connector window.

5. Click on

Done

. The Configuration Manager window

opens.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 155 156

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 41