Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 93)

Site Manager Parameters

308623-14.00 Rev 00

A-5

Parameter: Hardware Filter

Path: Configuration Manager > XCVR Connector > Edit Line

Default: Disable (the default changes to Enable when, while adding the circuit, you reply

OK to the prompt:

Do you want to enable Hardware Filters on this circuit?)

Options: Enable

Disable

Function: Enables filtering hardware in the link or net module to drop local frames at the

interface instead of copying them into system memory. Enabling hardware

filters improves bridging software performance because router resources are not

used to receive and reject local frames.

Instructions: Set to Enable only if you enabled the bridge software and the link or net module

has hardware filters.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.29

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 155 156

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 93