Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 156
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
Site Manager Parameters
308623-14.00 Rev 00
A-29
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > VLAN > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables the 802.1Q tagged circuit.
Instructions: Set to Disable to disable a previously configured 802.1 tagged circuit. Set to
Enable to enable a disabled 802.1Q tagged circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.2
Parameter: VLAN Name
Path: Configuration Manager > Protocols > VLAN > Interfaces
Default: None
Options: Any character string
Function: Specifies a name to associate with the VLAN. BayRS does not use this string.
Instructions: Enter a name for the VLAN.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.3
Parameter: Global VLAN Id
Path: Configuration Manager > Protocols > VLAN > Interfaces
Default: None
Options: Any integer value from 1 to 4095
Function: Provides a unique identifier for the VLAN within the layer 2/layer 3 topology.
Instructions: Enter the unique VLAN numeric identifier that was assigned to the VLAN when
it was initially configured on the adjacent layer 2 device. This value must match
the one assigned during the initial VLAN configuration.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.5
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 155 156

Comentarios a estos manuales

Sin comentarios