Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 101)

Site Manager Parameters

308623-14.00 Rev 00

A-13

Parameter: BofL Enable

Path: Configuration Manager > XCVR Connector > Edit Line

Default: Enable

Options: Enable

Disable

Function: When this parameter is set to Enable, the router sends BofL polling messages

from this system to all systems on the local network.

Instructions: Set to Enable or Disable. We recommend that you enable BofL.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.7

Parameter: BofL Timeout

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 5 (4 if router redundancy is enabled)

Options: 1 to 60 seconds

Function: Specifies the time between transmissions of Breath of Life messages from this

Ethernet interface. Timeout will occur if five periods elapse without a successful

BofL message transmission. When timeout occurs, the router disables and

reenables the Ethernet interface.

This parameter is valid only if you set BofL Enable to Enable.

Instructions: Accept the default BofL timeout of 5 seconds, or specify a new value up to 60

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.8

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 155 156

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 101