Avaya Configuring ATM and MPLS Services Manual de usuario descargar pdf (Pagina 181)

100

101

Customizing Signaling

117374-C Rev 00

5-33

Setting the ILMI Set Request Timer

The ILMI Set Request timer specifies the amount of time allowed for the circuit to

receive a SET_RESPONSE message after sending a SET_REQUEST message.

By default, the circuit waits 3 seconds for a response. However, you can set this

timer to a value from 1 to 120 seconds.

Using the BCC

To change the ILMI Set Request timer value, navigate to the ILMI prompt (for

example,

box; atm/11/1; signaling/11/1; ilmi/11/1

) and enter:

set-timer

integer

is the time value (in seconds) that you want the timer to use.

For example, the following command changes the ILMI Set Request timer to 6

seconds:

ilmi/11/1#

set-timer 6

ilmi/11/1#

Using Site Manager

To change the ILMI Set Request timer value, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

Interim Local Management

Interface (ILMI)

The ATM ILMI Signaling Parameters

window opens.

4. Set the

ILMI Set Timer

parameter. Click

Help

or see the parameter description

on page A-58.

5. Click on

Done

. You return to the Edit ATM Connector

window.

(continued)

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 528 529

Comentarios a estos manuales

Sin comentarios

Avaya Configuring ATM and MPLS Services Manual de usuario Pagina 181

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring ATM and MPLS Services