Avaya Using Technician Interface Software Manual de usuario descargar pdf (Pagina 214)

Using Technician Interface Software

8-62

Example (ip routes)

Enter the following command to display the table of IP “best” (used or active)

routes:

-N Retrieves the BGP ANNOUNCE table of routes. /jointfilesconvert/93594/bgp_routes

-p [

<local_peer_address

remote_peer_address>

]

Retrieves routes announced to a BGP peer you specify

by its local or remote address.

-S

<source_address>

Retrieves data pertaining only to the advertising source

you specify after the -S ﬂag.

ospf_lsdb

-s

<slot_number>

Retrieves data for the slot you specify after the -s flag.

If you also specify an address of 255.255.255.255 for a

given slot, the command displays only the internal cache

for that slot. If you do not enter a slot number, the

command retrieves only data pertaining to the slot where

the Technician Interface is running.

routes

| /jointfilesconvert/93594/bgp_routes |

cache

-t

<type_number>

Retrieves data for the OSPF LS type (type of Link State

advertisement) that you specify after the -t flag, as

follows:

0 = stub advertisement

1 = router links advertisement

2 = network links advertisement

3 = summary link (IP network) advertisement

4 = summary link (ASBR) advertisement

5 = external link advertisement

For more information on LS Types, refer to RFC 1583.

ospf_lsdb

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 351 352

Sin comentarios

Avaya Using Technician Interface Software Manual de usuario Pagina 214