Avaya Using Technician Interface Software Manual de usuario descargar pdf (Pagina 210)

Using Technician Interface Software

8-58

[-pause] immediately places the system in pause mode. Use this option with the

-ﬁleonly option.

<vol> is the slot number containing the volume used to store the file.

<filename> is the name of the file used to store the output.

You can suspend recording temporarily by using the

pause option.

You can determine the state of recording by testing the global variable

RECORD_STATE from a script. ON indicates the system is recording, OFF

indicates recording is turned off, and PAUSED indicates that recording is

temporarily suspended. To display the pause state of the record command, enter

the following:

record pause

To change the pause state, enter

record pause [on | off]

on disables recording.

off re-enables recording.

To close the record ﬁle and save it, enter the following command:

record close

Enabling Internal Clocking Mode

Within test environments and when using the HSSI Crossover Cable (Order No.

7832), you may need to conﬁgure Bay Networks routers from the Technician

Interface to enable internal clocking mode. Enter the following at the Technician

Interface prompt:

set wfHssiEntry.wfHssiInternalClkTestMode.4.1 1;commit

Note: When you specify a record ﬁle on a Flash (NVFS) volume, remember

that only one record ﬁle at a time can be open on that volume. If you attempt to

concurrently write other Technician Interface commands to another open

record ﬁle on the same volume, those commands will fail.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 351 352

Sin comentarios

Avaya Using Technician Interface Software Manual de usuario Pagina 210