Avaya Configuring Dial Services Manual de usuario Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 482
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
Configuring Dial Services
1-14
117353-B Rev. 00
Dial Backup Service
Dial backup service lets you configure backup lines for failed primary lines. A
primary line is a leased line, a leased multiline (Standard and PPP only), or a
leased multilink connection. This leased line acts as the physical connection over
which the leased circuit (the logical connection) carries traffic. You designate
these leased circuits as primary circuits, which instructs the router to provide
backup service if the primary line and circuit fail.
If a primary circuit fails and you configure dial backup service for that circuit, the
router activates an available backup line. When the primary circuit is restored, the
router reroutes all traffic from the backup circuit to the primary circuit and clears
the dial backup connection.
Dial backup is supported on asynchronous lines (RS-449), synchronous lines
(RS-449, V.35, RS-422, and X.21), and ISDN interfaces.
Table 1-2
lists the primary and backup lines you can configure.
Table 1-3
lists the protocols for each type of primary and backup circuit.
Table 1-2. Primary and Backup Lines
Line Type
Primary Any leased line up to T1/E1 rates, including multiline (Standard and
PPP only) and multilink connections. Frame relay multiline circuits cannot
be dial backup primaries.
Frame relay PVCs
Backup Any WAN line including ISDN B channels. Lines must be in the dial
backup pool.
Table 1-3. Primary and Backup Circuit Protocols
If the primary circuit’s protocol is The backup circuit’s protocol can be
Standard Async or Sync PPP only
PPP Async or Sync PPP only
Frame relay -- backing up a service record
with only one PVC
Async or Sync PPP only
Frame relay -- backing up the entire frame
relay interface
Frame relay only
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 481 482

Comentarios a estos manuales

Sin comentarios