
Configuring Dial Services
9-16
117353-B Rev. 00
Specifying a Modem Initialization Command (Hayes only)
Using the BCC, you can customize the modem initialization string for Hayes
compatible modems.
To configure a custom initialization string, you have to configure the
init-string
parameter. This parameter is valid only if the wan-type is asynchronous and the
media-type is hayes.
To set the initialization string, navigate to the serial prompt and enter:
init-string
<
string
>
string is an AT modem command string, which is an ASCII test string from 3 to
34 characters.
For example, to send a command to turn off the command echo, enter:
serial/3/1# init-string E0
Note:
To set a modem initialization string for interfaces that use RaiseDTR
and V.25bis signaling, see “Modifying the Modem Command String
” on
page 9-19
.
Note:
You must set the init-string for external Hayes compatible modems.
Consult the manual for your modem for valid initialization strings.
Comentarios a estos manuales