Avaya Configuring Dial Services Manual de usuario Pagina 334

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 482
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 333
Configuring Dial Services
A-20
117353-B Rev. 00
ISDN Switch Parameters
The ISDN Switch Configuration window (Figure A-7) contains the switch
parameters.
Figure A-7. ISDN Switch Configuration Window
Parameter: Switch Type
Path: Dialup > Demand/Backup/Bandwidth On Demand Pools > Pools >
Add
>
Demand/Backup/Bandwidth On Demand Pool Configuration >
OK
> Lines
Definition >
ISDN/MCT1/MCE1
Connector > ISDN Switch Configuration
Default: BRI NET3
|
PRI Net5
Options: BRI NET3
|
BRI SWISSNET3
|
BRI 5ESS
|
BRI DMS100
|
BRI KDD
|
BRI
NTT
|
BRI TS013
|
BRI NI1
|
PRI 5ESS
|
PRI DMS100
|
PRI 4ESS
|
PRI
KDD
|
PRI NTT
|
PRI Net5
|
PRI TS014
Site Manager displays only those switch options for the interface you are
configuring. For example, if you are setting up BRI service, you will see only
BRI switch types when you click on Values. In addition, if the router is
communicating with a Version 8.10 router, you will only see BRI switch types
that support Version 8.10 software.
Function: Specifies the type of ISDN switch to which you are connecting.
Instructions: Choose the appropriate ISDN switch. Refer to Table A-3
on A-21. On the ASN,
you cannot configure two different switch types on the same slot.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.6.1.3
Vista de pagina 333
1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 481 482

Comentarios a estos manuales

Sin comentarios