
Report reference
82 BCMS Operations
VDN report
This section includes the following topics:
● Command on page 82
● Description on page 83
● Sample reports on page 83
● Header definition on page 84
Command
list bcms vdn extension [time] [start time] [stop time] [print/
schedule]
list bcms vdn extension [day] [start day] [stop day] [print/
schedule]
% ALL BUSY The percentage of time that all the trunks in this trunk group were busy.
This value includes trunks that are maintenance busy. The calculation is:
where Busy Times is expressed in minutes and is the sum of all times
when all trunks were simultaneously busy.
% TIME
MAINT
The percentage of time that one or more trunks have been busied-out for
maintenance purposes. The calculation is:
where:
● Total Maintenance Busy Time is the sum of Maintenance Busy Time
(in minutes) for all trunks (individually) in this trunk group during this
interval
● Time Interval is expressed in minutes (for example, 30 if using a
half-hour interval, 60 if using a one-hour interval, and 1440 if using a
daily summary)
For reporting purposes, call data is stored during the time interval (hour or
half-hour) that the trunk goes idle, not when the telephone releases. Also,
changing the number of trunks in a trunk group can cause unexpected
results for that interval.
Trunk group summary report (continued)
Header Definition
Total of all Busy Times
Time Interval
------------------------------------------------------------ X 100()
Total Maintenance Busy Time x 100
Time Interval x Number of Trunks in Group
-----------------------------------------------------------------------------------------------------------------
Comentarios a estos manuales