
Historical reports
Issue 5.0 May 2005 55
Agent report
This section includes the following topics:
● Command on page 55
● Description on page 55
● Sample reports on page 56
● Header definitions on page 57
Command
list bcms agent extension/loginID [time] [staffed] [start time]
[stop time][print/schedule]
list bcms agent extension/loginID [day] [staffed] [start day]
[stop day] [print/schedule]
Description
The BCMS agent report provides traffic information for the specified agent. Depending on
specifics from the command line, the information may be displayed as either a time interval
or a daily summary. If neither time nor day is specified, time is the default. In this case, the
report displays data accrued for the previous 24 time intervals (hour or half-hour), including
data from the most recently completed time interval. To get information on the current time
interval, you must use a monitor bcms command.
When analyzing this report, keep the following in mind:
● All averages are for completed calls only.
● A completed call may span more than one time interval. ACD calls that are in process
(have not terminated) are counted in the time interval in which they terminate. For
example, if an ACD call begins in the 10:00 to 11:00 time interval, but terminates in
the 11:00 to 12:00 time interval, the data for this call is counted in the 11:00 to 12:00
time interval.
Asterisks indicate that the maximum for the associated field has been exceeded.
Comentarios a estos manuales