
Historical reports
Issue 5.0 May 2005 69
● Description on page 69
● Sample reports on page 70
● Header definitions on page 71
Command
list bcms summary split (split number) [time] [start time]
[stop time] [print/schedule]
list bcms summary split (split number) [day] [start day]
[stop day] [print/schedule]
Description
The BCMS Split Summary report provides traffic measurement information for a specified
group of BCMS splits. Depending on specifics from the command line, the information may
be displayed as either a time interval or a daily summary. If neither time nor day is
specified, time is the default. In this case, the report displays data accrued for the
previous 24 time intervals (hour or half-hour), including data from the most recently
completed time interval. To get information on the current time interval, you must use a
monitor bcms command.
This report is similar to the split report except that this report provides one line of data for
each split, which includes all data for the specified times. Data for a split does not appear
on the report if there is no data for that split. If you specify more than one time period, and
data exists for one or more, but not all, of the specified times, the system uses the
available data to calculate and display the one-line summary; the system does not identify
which times are not included in the calculations.
When analyzing this report, keep the following in mind:
● All averages are for completed calls only.
● Asterisks indicate that the maximum for the associated field has been exceeded.
Comentarios a estos manuales