Avaya Basic Call Management System (BCMS) Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Issue 5.0 May 2005 25
Generating reports
This chapter describes the procedures for displaying and printing real-time reports and for
displaying, printing, and scheduling historical reports. Before attempting to print these
reports, make sure that a system printer is connected and administered.
This section includes the following topics:
Displaying and printing real-time reports on page 25
Displaying, printing, and scheduling historical reports on page 28
Displaying and printing real-time reports
The monitor command is used to display and print real-time status reports. These reports
display data accrued since the last interval boundary. Data is based on hourly or
half-hourly intervals as administered in the BCMS/VuStats Measurement Interval
field on the Feature-Related System Parameters screen.
There are three monitor commands, one to display or print each real-time report:
monitor bcms split
monitor bcms system
monitor bcms vdn
Whenever a status report is displayed on the management terminal, it updates
automatically approximately every 30 seconds. You can immediately update the on-screen
status report by pressing UPDATE. To cancel the monitor command and return to the
command prompt, press CANCEL. If the status report consists of more than one page,
press NEXTPAGE to display any subsequent pages and PREVPAGE to display any
previous pages.
If you incorrectly enter the command, or if the qualifier is not applicable or is not measured,
an error message displays on the message line located on the bottom of the screen. If you
require more information about the error message, press HELP.
Complete the steps in the following topics to display or print real-time reports.
This section includes the following topics:
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 159 160

Comentarios a estos manuales

Sin comentarios