Avaya VoIP Monitoring Manager Reference Release 3.0 Manual de usuario descargar pdf (Pagina 26)

Avaya VoIP Monitoring Manager Reference

See Also

About VoIP Monitoring Manager

Components of VoIP Monitoring Manager

VoIP Monitoring Manager Server Error Messages

Configure IP-Network-Region form

There are two Switch Administration Forms (SAT) that need to be configured to send RTCP

reports to the RTCP Monitor. These forms are called the ip-network-region form and the system-

parameters ip-options form.

Configuration for the ip-network-region form

 Set the RTCP Reporting Enabled? field to y (yes).

 Set Use Default Server Parameters? field to y (yes). This indicates that this network

region uses the default values specified previously on the system-parameters-ip-options

form as well.

Why you might not want to use the default parameters?

Multiple VoIP Monitoring Manager Servers might be installed on a large system in order to reduce

the network traffic between a set of endpoints and the RTCP Monitor (e.g. low bandwidth link

between endpoints in one network region and a remote RTCP Monitor). The network traffic due to

RTCP reports being sent from the endpoints to the RTCP Monitor is usually low, less than 40

bytes per second per currently active VoIP call (RTP session). Therefore, it is usually

unnecessary to have multiple RTCP Monitors.

If multiple VoIP Monitoring Manager Servers are installed on the system then the endpoints in

each network region can be configured to send their RTCP reports to different RTCP Monitors.

To achieve this set the Use Default Server Parameters? field to n (no) and specify the IP

address of the Windows 2000 PC running the VoIP Monitoring Manager Server for that network

region.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 141 142

Sin comentarios

Avaya VoIP Monitoring Manager Reference Release 3.0 Manual de usuario Pagina 26