Avaya Configuring IP Services Manual de usuario Pagina 483

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 585
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 482
Routing Policies
117356-A Rev. A B-5
Parameter: Route Preference
Path: Configuration Manager > Protocols > IP > Policy Filters > RIP > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > OSPF > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > EGP > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP3 > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP4 > Accept
Policies
Default: 1
Options: 1 to 16
Function: Assigns a metric value (the higher the number, the greater the preference) to a
route that the protocol forwards to the routing table manager. If confronted with
multiple routes to the same destination, the routing table manager may need to
use this value to decide which route to insert.
Instructions: Either accept the default value, 1, or enter a new value. Routes for all networks
(0.0.0.0/0.0.0.0) should have the lowest preference and routes for the most
specific networks (longest address and mask) should have the highest
preference.
MIB Object ID: RIP: 1.3.6.1.4.1.18.3.5.3.2.6.1.1.7
OSPF: 1.3.6.1.4.1.18.3.5.3.2.6.3.1.7
EGP: 1.3.6.1.4.1.18.3.5.3.2.6.5.1.7
BGP-3: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.7
BGP-4: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.7
Vista de pagina 482
1 2 ... 478 479 480 481 482 483 484 485 486 487 488 ... 584 585

Comentarios a estos manuales

Sin comentarios