
Configuring IP Services
7-28 117356-A Rev. A
Navigating the BCC to an OSPF Interface Prompt
Beginning at the prompt for an IP interface to which you have added OSPF, enter
ospf
An OSPF interface-specific prompt appears.
To display OSPF parameters for this interface and their current (default) values,
enter
info
For example, the following command sequence invokes the OSPF prompt for IP
interface 2.2.2.2 and displays OSPF interface parameters and values.
ip/2.2.2.2/255.0.0.0# ospf
ospf/2.2.2.2# info
on ip/2.2.2.2/255.0.0.0
state enabled
area 0.0.0.1
authentication {}
type broadcast
priority 1
transit-delay 1
retransmission-interval 5
hello-interval 10
dead-interval 40
poll-interval 120
metric 1
mtu 1
ospf/2.2.2.2#
Comentarios a estos manuales