Avaya Configuring IP Services Manual de usuario Pagina 389

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 585
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 388
Site Manager Parameters
117356-A Rev. A A-5
BGP-3 Global Parameters
Parameter: BGP Dynamic Policy Change Support
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
| Disable
Function: Specifies whether or not BGP dynamically reevaluates all routes affected by a
policy when you modify the policy.
Instructions: Select disable if you want BGP to restart all connections when you modify a
policy.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.19
Parameter: BGP Soloist Slots
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: All slots
Options: Slots 1 to 14
Function: Specifies slots on which the BGP soloist is eligible to run.
Instructions: Use the ISP Mode parameter (IP global) to configure BGP as a soloist.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.20
Parameter: Enable
Path: Configuration Manager > Protocols > IP > BGP > BGP-3 Global
Default: Enable
Options: Enable
| Disable
Function: Globally enables or disables BGP-3 on all router interfaces.
Instructions: Set to Disable if you want to disable BGP-3 for the entire router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.2.1.2
Vista de pagina 388
1 2 ... 384 385 386 387 388 389 390 391 392 393 394 ... 584 585

Comentarios a estos manuales

Sin comentarios