Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 233)

Monitoring Frame Relay Using the BCC show Command

308624-14.10 Rev 01

C-15

show frame-relay stats signalling transmit

Displays signalling transmit statistics for frame relay interfaces.

The output contains the following information:

Interface Interface on which the frame relay SVC resides.

Setup Indicates the number of seconds allowed from the

time the router sends a setup message to the called

subscriber and receives a connect or call proceeding

message from the called subscriber.

Call Proceeding Indicates the number of seconds allowed from the

time the router receives a call proceeding message

to the time the router receives a connect or

disconnect message.

Connect Message sent by the called user to the network and

by the network to the calling user to indicate call

acceptance by the called user.

Disconnect Indicates the number of seconds allowed from the

time the router sends a disconnect message and

receives a release message back.

Release Indicates the number of seconds allowed for a call

clearing initiated by the other end of the connection

or when the disconnect timer expires.

Release Complete Indicates that the network returns a release complete

message to the subscriber in response to a release

message sent from the subscriber.

Status Message sent by the user or network in response to

a status enquiry or to report error conditions.

Unnumbered Frames Sent Number of unnumbered acknowledgment frames

(UAs) sent over SVCs to a subscriber or router.

Status Enquiry Message sent by the user or network to solicit a

status message.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 245 246

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 233