Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 138)

Configuring Frame Relay Services

5-28

308624-14.10 Rev 01

For example, the following command line sets a congestion timer

of 2.5 seconds:

frame-relay/1/2# congestion-timer 2.5

frame-relay/1/2#

Congestion Counter

To change the value for the congestion counter, navigate to the frame-relay prompt

(for example,

box; serial/1/2; frame-relay/1/2) and enter:

congestion-counter

integer

is the maximum number of congestion notifications the router can receive

during the congestion timer period before it stops transmitting data.

The value can be from 1 to 500 notifications. The default is 20.

For example, the following command line sets a congestion counter

of 30 notifications:

frame-relay/1/2# congestion-counter 30

frame-relay/1/2#

Congestion Method

To change the value for the congestion method, navigate to the frame-relay

prompt (for example,

box; serial/1/2; frame-relay/1/2) and enter:

congestion-method

<value>

value

can be:

throttle-then-shutdown -- first queues traffic when congestion occurs, and then

terminates the VC if throttling does not alleviate congestion. This option is valid

only when traffic shaping is enabled.

shutdown -- the default, terminates the VC when congestion occurs.

throttle -- queues traffic when congestion occurs; traffic resumes when congestion

clears. This option is valid only when traffic shaping is enabled.

For example, the following command line sets a congestion method of throttle:

frame-relay/1/2# congestion-method throttle

frame-relay/1/2#

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 245 246

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 138