Avaya Configuring AppleTalk Services Manual de usuario Pagina 97
- Pagina / 120
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Editing AppleTalk Parameters
117366-A Rev. A 4-11
Parameter: Enable Split Horizon
Default: Enable
Options: Enable
| Disable
Function: Specifies whether AppleTalk Split Horizon is enabled or disabled for
Frame Relay interfaces.
Instructions: Accept the default, Enable, unless this AppleTalk interface connects to a
non-fully-meshed Frame Relay topology. If this interface does connect to
a non-fully-meshed Frame Relay topology, reset to Disable so that the
network does not split at the partial mesh.
See the section “Configuring the AppleTalk Router in a Non-Fully
Meshed Frame Relay Topology” in Chapter 2 for more information.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1#81
Configuring AppleTalk Zone Lists
You can add or delete zones from an AppleTalk interface zone list.
When you edit an AppleTalk configuration in dynamic mode, you must wait at
least 10 minutes between editing a zone list and reenabling the interface. This
waiting period allows other routers on the network to update their zone
information tables. See the following instructions.
Adding Zones to a Zone List
To add a zone to the AppleTalk router’s zone list, begin at the Configuration
Manager window (F
igure 4-1):
1. Select Protocols > AppleTalk > Interfaces.
The AT Interface Configuration window appears (F
igure 4-3).
2. Set the Enable parameter to Disable.
3. Click on Apply.
This disables the AppleTalk interface so that you can edit its zone list.
Note: Because editing an AppleTalk zone list can affect your network’s
performance, refer to the section “Adding or Removing AppleTalk Zones” in
Chapter 2 before proceeding.
- Configuring AppleTalk 1
- Services 1
- Contents 5
- 117366-A Rev. A 10
- About This Guide 13
- Conventions 14
- Acronyms 14
- Bay Networks Customer Service 16
- How to Get Help 16
- Chapter 1 17
- AppleTalk Overview 17
- AppleTalk Addresses 18
- AppleTalk Zones 20
- Figure 1-4. DDP Packet 25
- 1-10 117366-A Rev. A 26
- Figure 1-5. RTMP Data Packet 26
- 1-12 117366-A Rev. A 28
- Name Binding Protocol (NBP) 29
- AppleTalk Echo Protocol (AEP) 30
- 1-18 117366-A Rev. A 34
- 1-20 117366-A Rev. A 36
- For More Information 37
- Chapter 2 39
- 2-2 117366-A Rev. A 40
- 117366-A Rev. A 2-3 41
- 2-4 117366-A Rev. A 42
- 117366-A Rev. A 2-5 43
- Specifying Interface Costs 44
- 117366-A Rev. A 2-7 45
- APT0013A 45
- Interface 46
- 117366-A Rev. A 2-9 47
- Using AppleTalk Zone Filters 48
- 117366-A Rev. A 2-11 49
- 2-12 117366-A Rev. A 50
- 117366-A Rev. A 2-13 51
- 2-14 117366-A Rev. A 52
- 117366-A Rev. A 2-15 53
- 2-16 117366-A Rev. A 54
- 117366-A Rev. A 2-17 55
- 2-18 117366-A Rev. A 56
- 117366-A Rev. A 2-19 57
- 2-20 117366-A Rev. A 58
- 117366-A Rev. A 2-21 59
- 2-22 117366-A Rev. A 60
- 117366-A Rev. A 2-23 61
- 2-24 117366-A Rev. A 62
- 117366-A Rev. A 2-25 63
- 3-3 Engineering (Rule 1) 63
- 2-26 117366-A Rev. A 64
- Token Ring Networks 65
- 2-28 117366-A Rev. A 66
- Frame Relay Topology 67
- 2-30 117366-A Rev. A 68
- Topology 68
- AURP Information 69
- Setting the Update Rate 70
- 117366-A Rev. A 2-33 71
- 2-34 117366-A Rev. A 72
- Figure 2-22. Network Loop 72
- Setting Zone Filters 73
- Setting the Interface Cost 73
- 2-36 117366-A Rev. A 74
- Chapter 3 75
- Enabling AppleTalk Services 75
- 3-2 117366-A Rev. A 76
- 3-4 117366-A Rev. A 78
- Configuring the Zone List 79
- Click on Add 80
- 117366-A Rev. A 3-7 81
- Configuring AURP 82
- 117366-A Rev. A 3-9 83
- 117366-A Rev. A 3-11 85
- Chapter 4 87
- 4-2 117366-A Rev. A 88
- 4-6 117366-A Rev. A 92
- 4-8 117366-A Rev. A 94
- 4-10 117366-A Rev. A 96
- 117366-A Rev. A 4-13 99
- 117366-A Rev. A 4-15 101
- Editing the Zone Filter Type 103
- 4-18 117366-A Rev. A 104
- 117366-A Rev. A 4-19 105
- Globally Deleting AppleTalk 107
- 108
- 4-24 117366-A Rev. A 110
- Editing AppleTalk Parameters 111
- 4-28 117366-A Rev. A 114
- Appendix A 115
- AppleTalk Default Settings 115
- (continued) 116
- 117366-A Rev. A Index-1 117
- 117366-A Rev. A Index-3 119
Relacionado con productos y manuales para Redes Avaya Configuring AppleTalk Services
Redes Avaya 1220 Manual de usuario
(180 paginas)
(180 paginas)
Redes Avaya Configuring OSI Services Manual de usuario
(138 paginas)
(138 paginas)
Redes Avaya BCM Imaging Tool Guía de usuario
(42 paginas)
(42 paginas)
Redes Avaya BCM50 Guía de usuario
(40 paginas)
(40 paginas)
Redes Avaya R6.0 Nota de aplicación
(30 paginas)
(30 paginas)
Redes Avaya AP-8 Nota de aplicación
(22 paginas)
(22 paginas)
Redes Avaya Configuring ATM Services Manual de usuario
(268 paginas)
(268 paginas)
Redes Avaya Configuring APPN Services Manual de usuario
(150 paginas)
(150 paginas)
Redes Avaya R1.3 Guía de configuración
(13 paginas)
(13 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales