Avaya Configuring AppleTalk Services Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
Configuring AppleTalk Services
4-26 117366-A Rev. A
Parameter: Hop Count Reduction
Default: Disable
Options: Enable
| Disable
Function: Enables or disables hop count reduction.
Instructions: Set to Enable to enable hop count reduction. Set to Disable to disable hop
count reduction.
Do not use hop count reduction in a topology that has loops (AURP or
RTMP).
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.9.1#10
Parameter: Interface Cost
Default: 0 hops
Options: 0 to 15 hops
Function: Specifies the additional number of hops (cost) added to routes that this
interface learns via RTMP data packets.
Instructions: If you want to limit the use of an interface, assign a high cost. If you do
not want to limit the use of an interface, assign a low cost. See
“Specifying Interface Costs” in Chapter 2 for more information.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.9.1#11
Parameter: Zone Filter Default Zone
Default: None
Options: Any valid zone name
Function: Specifies the name of the Default Zone used for the 5.X Include or
5.X Exclude options.
Instructions: Enter an appropriate zone name. A valid zone name contains from 1 to 32
characters and can include any character except for the asterisk (*). For
more information, refer to “Using Nonprintable Characters in AppleTalk
Zone Names” in Chapter 3.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.9.1#80
Vista de pagina 111

Comentarios a estos manuales

Sin comentarios