Avaya Configuring AppleTalk Services Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
Enabling AppleTalk Services
117366-A Rev. A 3-5
Parameter: Default Zone
Default: None
Options: Any valid zone name
Function: Specifies the name of the default zone to which all new nodes are
assigned when they first start up on this network.
This parameter is used in conjunction with the Network Start and
Network End parameters to help define a seed router. If you have not
specified a Network Start for this interface, this parameter is ignored.
Instructions: To configure this interface as a nonseed router, leave this field blank.
To configure this interface as a seed router, specify the Default Zone as
follows:
If this is the only seed router on the network, enter any valid Default
Zone name.
If there are already seed routers on the network, enter the same
Default Zone name as is configured on all other seed routers.
A valid zone name can consist of a maximum of 32 characters and can
include any character except an asterisk (*). See “Using Nonprintable
Characters in AppleTalk Zone Names” in this chapter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1.15
Configuring the Zone List
To configure a Zone List, you must add zones to the list, as follows:
1. Click on Zone List in the AppleTalk Interface Configuration window
(F
igure 3-1).
The AT Zone Configuration window appears (F
igure 3-2).
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 119 120

Comentarios a estos manuales

Sin comentarios