
Configuring AppleTalk Services
3-4 117366-A Rev. A
Parameter: Network End
Default: 0
Options: 0 to 65279
Function: Specifies the upper boundary (maximum) of the range of network
numbers available for use by nodes on the network to which this interface
connects.
You use this parameter with the Network Start parameter to help define a
seed router. If you have not specified a Network Start for this interface,
this parameter is ignored.
Instructions: To configure this interface as a nonseed router, accept the default, 0.
To configure this interface as a seed router, specify the Network End as
follows:
– If this is the only seed router on the network, determine the network
range for this interface, and enter the upper boundary network
number.
– If there are already seed routers on the network, enter the same
Network End value that is configured on all other seed routers.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1.14
Comentarios a estos manuales