Avaya Configuring AppleTalk Services Manual de usuario Pagina 77

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 76
Enabling AppleTalk Services
117366-A Rev. A 3-3
For information on editing all of the parameters in the AppleTalk Interface
Configuration window, refer to Chapter 4.
Parameter: Network Start
Default: 0
Options: 0 to 65279
Function: Specifies the lower boundary (minimum) of the range of network
numbers available for use by nodes on the network to which this interface
connects.
This parameter’s setting determines whether this interface functions as a
seed or nonseed router.
Instructions: To configure this interface as a nonseed router, accept the default, 0.
To configure this interface as a seed router, specify this parameter as
follows:
If this is the only seed router on the network, determine the network
range for this interface, and enter the lower boundary network
number.
If there are already seed routers on the network, enter the same
Network Start value that is configured on all other seed routers.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1.13
Note: If you specify a Network Start other than the default, 0, the router
automatically becomes a seed router and you must also specify values for the
Network End and Default Zone parameters.
Vista de pagina 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 119 120

Comentarios a estos manuales

Sin comentarios