Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 aviso Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
60
215148-D
Figure 10 show sys-info command output
sntp enable command
The sntp enable command enables SNTP. The syntax for the sntp enable
command is:
sntp enable
The sntp enable command is in the config command mode.
The sntp enable command has no parameters or variables.
Note: The default setting for SNTP is disabled.
BS470_48#show sys-info
Operation Mode: Switch
MAC Address: 00-04-38-D5-86-40
Reset Count: 0
Last Reset Type: Power Cycle
Power Status: Primary Power
Autotopology: Enabled
GBIC Port 47: None
GBIC Port 48: None
sysDescr: BayStack 470 - 48T
HW:#0D FW:3.0.0.5 SW:v3.1.14 ISVN:2
sysObjectID: 1.3.6.1.4.1.45.3.46.1
sysUpTime: 2 days, 23:25:51
sysNtpTime: 2003-10-27 20:16:12 GMT
sysServices: 3
sysContact:
sysName:
sysLocation:
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 85 86

Comentarios a estos manuales

Sin comentarios