Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 aviso descargar pdf (Pagina 16)

215148-D

a Add the new unit to the stack leaving the original base unit unchanged.

Do not change the base unit switches on the back.

b Power up the stack so that the new unit can learn the IP configuration

and stack information. Verify the configuration of the stack.

c Turn off power to all units in the stack by unplugging the power cords

from each unit.

d Change the base unit selector switch on the new unit so that it is now

base unit.

e Change the base unit selector switch on the original base unit so that it is

not longer configured as the base unit.

8 Power-up the newly joined units by plugging in the power cords and verify the

configuration. It may take a few minutes for the entire stack to display on the

console. All units will display as their new numbers within the newly formed

stack.

If you are running a pure stack that consists of only BPS2000s, and you add a

BayStack 460, a BayStack 470-24T switch, or a BayStack 470- 8T switch to

create an allied stack, you must manually change the base unit from a BPS

2000 switch. (Q00725300)

• The CLI command "default duplex" may not be executed against a

GBIC port. If you execute this command against a GBIC port, you may see

the following error:

% Cannot modify settings

% inconsistentValue <port_number>

(Q00779732)

• When using LAG, a maximum of one standby link is supported. (Q00783242)

• The ports on the BPS2000 2GT MDA may not be the target of the interface

"flowcontrol" command. Changing the flow control of the ports on the

BPS2000 2GT will result in autonegotiation being disabled on the port which

is an unsupported configuration. (Q00787182)

• LAG / IGMP stream does not failover immediately when standby is present.

(Q00804064)

• You must enable IGMP proxy when using IGMP in conjunction with LAG or

MLT. (Q00805627)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 85 86

Sin comentarios

Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 aviso Pagina 16