Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 aviso descargar pdf (Pagina 47)

Release Notes for BayStack Operating System Switching Software (BoSS) 3.1

Explanation

The unit did not receive any acknowledgment when it communicates

with its downstream unit.

Diagnostic Info

First, determine whether you have a bad cable or bad downstream

unit. If the cable connecting to the OUT stack port is bad, the stack

port on both ends of the cable should be wrapped out and the units

attached to the cable should still be in stack. Also, the unit that is

attached to the other end of the cable should have the following

system log entry, "IN stack port wrapped; check for bad cable or unit".

Replace the cable with a good one, and reboot the units that were

attached to this cable. On the other hand, if the downstream unit is

bad, the downstream led on the downstream unit should be amber

and the downstream unit is not in stack. Replace the downstream

stack module or downstream unit.

Table 20

Log Entry

Stack manager event MODULE INACTIVE (module id = <physical

id>)

Explanation

Informational message declaring that the module < module mask>

has become inactive because it did not receive the necessary

heartbeat packets.

Diagnostic Info

You need to find out why heartbeats are not getting to this unit

<physical id>. Make sure that the unit is connected to the stack

properly and the cascading connectors are screwed in all the way. If

you just powered off the module, then this log is expected to show up.

Table 21

Log Entry

Stack manager event BECOME TEMP BU (module id <physical id>)

Explanation

Informational message declaring the unit has become the base unit

due to the heartbeat packets not being received from the former base

unit.

Diagnostic Info

Make sure that the former base unit is still operational. Typically,

when the base unit goes out for more than 30 seconds, a temporary

base unit will take over.

Table 22

Log Entry

Stack manager detected a unit coming up

Table 19

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 85 86

Comentarios a estos manuales

Sin comentarios

Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470 aviso Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red Avaya BayStack Operating System Switching Software (BoSS 3.1) for BayStack 460, 470