Avaya IP Telephony Guía de configuración Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 146
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
Chapter 6 Typical applications 97
IP Telephony Configuration Guide
Setting up the call chain configuration
To set up this system:
1 Ensure that the existing network can support the additional VoIP traffic.
2 Coordinate a Private dialing plan between the systems.
3 On each Business Communications Manager 2.5 system:
Set up outgoing call configuration for the VoIP gateway.
Set up a remote gateway for other Business Communications Managers.
Set phones to receive incoming calls through target lines.
Configure the PSTN fallback and enable QoS on both systems.
4 Reboot each system.
5 Set up a Call Center on the central Business Communications Manager.
Business Communications Manager to IP telephones
The system shown in Figure 39 allows home-based users or Call Center agents to use the full
capabilities of the Business Communications Manager, including access to system users,
applications, and PSTN connections. This system does not require VoIP trunk configuration. This
system functions in a similar manner to the system described in Multi-location chain with call
center on page 96. This system is less expensive and on a smaller scale. However, it does not
offer PSTN fallback.
Figure 39 Connecting to IP telephones
Intranet
VoIP trunk
i2050 Software Phone
i2004
telephone
System
telephone
Central
Office
Home-based users
or Call Center agents
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 145 146

Comentarios a estos manuales

Sin comentarios