Avaya IP Telephony Guía de configuración Pagina 74
- Pagina / 146
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
74 Chapter 5 Configuring VoIP trunks
P0937663 03.1
In this case, the user dials the destination code plus the DN. The destination code is
absorbed, but the system dials out the access number (1-XXX-XXX) before the DN digits.
8 Repeat these steps for your destination code 9.
a Under the destination code, select the Normal schedule.
b Specify the route you created for the local PSTN.
c Set the absorb length to 0.
d Repeat these steps for the VoIP schedule.
Activating the VoIP schedule
Before activating the VoIP schedule, calls using the destination code are routed over the PSTN.
This is because the system is set to use the Normal schedule, which routes the call over the PSTN.
Once the VoIP schedule is activated, calls made with the VoIP destination code are routed over the
VoIP trunk.
The VoIP line must be activated from the control set for the telephones. For information about
control sets, refer to the Business Communications Manager 2.5 Programming Operations Guide.
To activate the VoIP schedule:
1 Dial ≤ °‡‹ from the control set for the VoIP trunk.
The phone prompts you for a password.
2 Type the password.
3 Press
OK
.
The first schedule appears.
4 Scroll down the list until VoIP is selected.
5 Press
OK
.
The VoIP schedule stays active, even after a system reboot, and can only be deactivated
manually.
To deactivate the VoIP schedule:
1 Dial ≤£°‡‹. The phone prompts you for a password.
2 Type the password.
3 Press
OK
. The system returns to the Normal schedule.
Note: This same process will be necessary if you are part of a Universal Dialing Plan
(UDP), where each system is assigned a private access code that is not part of the DN and
you want your users to be able to just dial the DN of the telephone they are calling. In that
case, you enter the private access code in the External # field, and that gets dialed out
before the DN.
- Business Communications 1
- Manager 2.5 1
- IP Telephony Configuration 1
- Trademarks 2
- Contents 3
- Chapter 4 4
- Chapter 5 5
- Chapter 6 6
- Appendix A 6
- 12 Tables 12
- Before you begin 13
- Symbols used in this guide 13
- Text conventions 14
- Acronyms 14
- Related publications 15
- How to get help 16
- Chapter 1 17
- Introduction 17
- IP telephones and VoIP trunks 18
- Figure 1 Network diagram 19
- Telephones 20
- IP network 21
- Key IP telephony concepts 22
- Jitter Buffer 23
- QoS routing 23
- Chapter 2 25
- Prerequisites checklist 25
- Network assessment 26
- Resource assessment 27
- Keycodes 27
- Defining published IP address 28
- IP telephones 30
- NetVision wireless telephones 30
- Chapter 3 31
- Installing IP telephones 31
- Choosing a codec 33
- Choosing a Jitter Buffer 34
- Before installing 34
- Using a 3-port switch 35
- NORTEL NETWORKS 36
- Manual Cfg DHCP(0 no, 1 yes) 36
- Field Value Description 37
- Slow connection 40
- One-way or no speech paths 40
- Dropped voice packets 40
- Changing the contrast level 40
- Configuring DHCP 41
- Figure 5 IP Terminal status 42
- Figure 6 Configuration menu 42
- Figure 8 Configuration menu 44
- Download Pending 44
- Customizing feature labels 46
- Moving IP telephones 47
- Keep DN alive 48
- Figure 12 i2050 Switch type 49
- 7 Click on the BCM option 50
- Configuring NetVision records 52
- /symbol.com> 53
- <http:/ 53
- Testing the handset functions 55
- Changing a handset Name 57
- Configuring VoIP trunks 59
- Configuring media parameters 60
- Setting silence compression 61
- Setting jitter buffers 62
- Outgoing call configuration 63
- Figure 18 Trunk/Line data 64
- Configuring a remote gateway 66
- Configuring PSTN fallback 68
- Enabling PSTN fallback 69
- Setting up the VoIP schedule 69
- Configuring routes 70
- Figure 26 VoIP schedule 73
- Activating the VoIP schedule 74
- Turning on QoS monitor 75
- Incoming call configuration 76
- Example configuration 78
- Making calls 82
- Connecting an i200X telephone 83
- Quality of Service Monitor 86
- Port settings 86
- Using firewalls 87
- Using a gatekeeper 88
- The call signaling method 89
- Gatekeeper call scenarios 91
- Typical applications 93
- Setting up the system 95
- Efficient Networking 99
- Network engineering 100
- LAN engineering examples 103
- WAN engineering 104
- Setting Non-linear processing 105
- (8 kb/s) 106
- P0937663 03.1 106
- Traceroute 106
- Enough link capacity 107
- Not enough link capacity 107
- Further network analysis 108
- Reduce link delay 109
- Reducing hop count 109
- Adjust the jitter buffer size 110
- Reduce packet errors 110
- Routing issues 111
- Appendix B 113
- Silence compression 113
- Comfort noise 116
- Appendix C 117
- Network performance utilities 117
- Appendix D 119
- Interoperability 119
- Speech path setup methods 120
- Media path redirection 120
- Gatekeeper 120
- Symbol NetVision telephones 121
- 122 Interoperability 122
- Appendix E 123
- Quality of Service 123
- Measuring Intranet QoS 124
- Recording routes 125
- Adjusting Ping measurements 126
- Measurement procedure 127
- 128 Quality of Service 128
- Traffic mix 129
- TCP traffic behavior 129
- Network Quality of Service 130
- Quality of Service parameters 131
- Fallback to PSTN 132
- Glossary 133
- 134 Glossary 134
- Glossary 135 135
- 136 Glossary 136
Relacionado con productos y manuales para Gateways / Controladores Avaya IP Telephony
(54 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales