Avaya IP Telephony Guía de configuración Pagina 82
- Pagina / 146
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
82 Chapter 5 Configuring VoIP trunks
P0937663 03.1
11 The installer creates a destination code of 2.
• Under the Normal schedule, the installer assigns Route 003, which uses line pool PRI-A.
The absorb digits is set to All.
• Under the VoIP schedule the installer assigns Route 100, which uses the VoIP lines in line
pool O. The absorb digits is set to 0.
12 The installer creates a destination code of 9, which is the line pool access code for the local
PSTN access lines.
• Under the Normal schedule, the installer assigns the route created for the local PSTN
access with absorb digits set to All.
• Under the VoIP schedule the installer assigns the route created for the local PSTN access
with absorb digits set to All.
13 The installer dials ≤°‡‹ and selects the VoIP schedule. VoIP is now activated. At
this point, the system is configured to make outgoing calls, but it is not set up to receive
incoming calls.
14 If there are no target lines set up, the installer creates target lines for each telephone record or
Hunt group.
Making calls
From a set on Business Communications Manager Ottawa, a caller dialing a set on Business
Communications Manager Santa Clara must dial the destination code, which includes the
destination digits for the Business Communications Manager Santa Clara remote gateway, and the
DN of the set. For example, dialing 33322 would connect as follows:
• 3 is the destination code. If a suitable level of QoS is available, the call is routed through the
VoIP trunks and through the remote gateway with destination digits of 3. The call is sent
across the PDN using the IP address of the Santa Clara Business Communications Manager.
• 3322 is linked to the target line associated with DN 3322.
• The call arrives at the phone with the DN 3322.
If a user in Santa Clara wanted to make a local call in Ottawa, they would dial 29, followed by the
local Ottawa number. The digit 2 accesses the remote gateway for the VoIP line. The digit 9
accesses an Ottawa outside line.
- Business Communications 1
- Manager 2.5 1
- IP Telephony Configuration 1
- Trademarks 2
- Contents 3
- Chapter 4 4
- Chapter 5 5
- Chapter 6 6
- Appendix A 6
- 12 Tables 12
- Before you begin 13
- Symbols used in this guide 13
- Text conventions 14
- Acronyms 14
- Related publications 15
- How to get help 16
- Chapter 1 17
- Introduction 17
- IP telephones and VoIP trunks 18
- Figure 1 Network diagram 19
- Telephones 20
- IP network 21
- Key IP telephony concepts 22
- Jitter Buffer 23
- QoS routing 23
- Chapter 2 25
- Prerequisites checklist 25
- Network assessment 26
- Resource assessment 27
- Keycodes 27
- Defining published IP address 28
- IP telephones 30
- NetVision wireless telephones 30
- Chapter 3 31
- Installing IP telephones 31
- Choosing a codec 33
- Choosing a Jitter Buffer 34
- Before installing 34
- Using a 3-port switch 35
- NORTEL NETWORKS 36
- Manual Cfg DHCP(0 no, 1 yes) 36
- Field Value Description 37
- Slow connection 40
- One-way or no speech paths 40
- Dropped voice packets 40
- Changing the contrast level 40
- Configuring DHCP 41
- Figure 5 IP Terminal status 42
- Figure 6 Configuration menu 42
- Figure 8 Configuration menu 44
- Download Pending 44
- Customizing feature labels 46
- Moving IP telephones 47
- Keep DN alive 48
- Figure 12 i2050 Switch type 49
- 7 Click on the BCM option 50
- Configuring NetVision records 52
- /symbol.com> 53
- <http:/ 53
- Testing the handset functions 55
- Changing a handset Name 57
- Configuring VoIP trunks 59
- Configuring media parameters 60
- Setting silence compression 61
- Setting jitter buffers 62
- Outgoing call configuration 63
- Figure 18 Trunk/Line data 64
- Configuring a remote gateway 66
- Configuring PSTN fallback 68
- Enabling PSTN fallback 69
- Setting up the VoIP schedule 69
- Configuring routes 70
- Figure 26 VoIP schedule 73
- Activating the VoIP schedule 74
- Turning on QoS monitor 75
- Incoming call configuration 76
- Example configuration 78
- Making calls 82
- Connecting an i200X telephone 83
- Quality of Service Monitor 86
- Port settings 86
- Using firewalls 87
- Using a gatekeeper 88
- The call signaling method 89
- Gatekeeper call scenarios 91
- Typical applications 93
- Setting up the system 95
- Efficient Networking 99
- Network engineering 100
- LAN engineering examples 103
- WAN engineering 104
- Setting Non-linear processing 105
- (8 kb/s) 106
- P0937663 03.1 106
- Traceroute 106
- Enough link capacity 107
- Not enough link capacity 107
- Further network analysis 108
- Reduce link delay 109
- Reducing hop count 109
- Adjust the jitter buffer size 110
- Reduce packet errors 110
- Routing issues 111
- Appendix B 113
- Silence compression 113
- Comfort noise 116
- Appendix C 117
- Network performance utilities 117
- Appendix D 119
- Interoperability 119
- Speech path setup methods 120
- Media path redirection 120
- Gatekeeper 120
- Symbol NetVision telephones 121
- 122 Interoperability 122
- Appendix E 123
- Quality of Service 123
- Measuring Intranet QoS 124
- Recording routes 125
- Adjusting Ping measurements 126
- Measurement procedure 127
- 128 Quality of Service 128
- Traffic mix 129
- TCP traffic behavior 129
- Network Quality of Service 130
- Quality of Service parameters 131
- Fallback to PSTN 132
- Glossary 133
- 134 Glossary 134
- Glossary 135 135
- 136 Glossary 136
Relacionado con productos y manuales para Gateways / Controladores Avaya IP Telephony
(54 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.085 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales