Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 99)

Configuring RARP Services

4-7

Parameter: MAC Address

Default: None

Options: Any valid MAC address

Function: Speciﬁes the MAC address of a client that will use the RARP services of

this router.

The client will include the MAC address you specify here in RARP

requests it broadcasts to the router.

Instructions: Enter the MAC address of a client.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.2.1.2

Parameter: IP Address

Default: 0.0.0.0

Options: Any valid IP address

Function: Speciﬁes the corresponding IP address for the client with the MAC

address you specify.

When the router receives a RARP request from the client, the router

assigns this IP address to the client and includes it in a response packet.

Instructions: Enter the IP address corresponding to the value of the MAC Address

parameter. Do not accept the default value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.2.1.3

Disabling RARP Globally

To globally disable RARP from all router interfaces on which it is conﬁgured,

begin at the Conﬁguration Manager window (refer to Figure 1-3) and proceed as

follows:

1. Select Protocols➔IP➔Reverse ARP➔Globals.

The Edit RARP Global Parameters window appears (Figure 4-5).

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 107 108

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 99