Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario descargar pdf (Pagina 75)

Configuring BOOTP Services

2-13

3. Specify the input IP and output IP addresses.

Use the descriptions that follow as a guide.

4. Click on OK.

The BOOTP Relay Agent Forwarding Table window now lists the interface

pair you added and default values for the Enable/Disable and Pass Through

Mode parameters. Note that if you entered an IP address that you have not

conﬁgured on the router,

??? appears before the IP address (example:

??? 111.111.111.111). When you configure the IP address on the router, Site

Manager replaces

??? with the appropriate address.

5. Edit the Enable/Disable and Pass Through Mode parameters, if you

want.

Use the descriptions that follow as a guide.

6. Click on Done to exit the window.

Parameter: Input IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP interface that receives BOOTREQUEST packets from

clients.

Instructions: Enter the IP address of a numbered network interface that you want to

receive BOOTREQUEST or DHCP packets from clients, then conﬁgure

this IP address on the router, if you have not already done so.

Do not specify an unnumbered interface for this parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.3

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 107 108

Sin comentarios

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 75