Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 80)

Configuring ATM Half-Bridge Services

A-24

308611-14.00 Rev 00

Parameter: VCI Number

Path: Configuration Manager > Protocols > ATM > Service Records > PVC > Add

Default: None

Options: 32 to 65535

Function: Identifies the virtual channel of the PVC. The VCI is part of the cell header. The

header can contain a maximum of 16 VCI bits. This bit range allows for path

identifiers from 0 to 65535.

Instructions: Enter a value from 32 to 65535.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.5.1.4

Note: Following the recommendation of the ATM Forum, virtual channel

identifiers from 0 to 31 are reserved for signaling and added functionality.

Parameter: Hybrid/Bridged VC

Path: Configuration Manager > Protocols > ATM > Service Records > PVC

Default: No

Options: Yes

Function: Specifies whether the VC is set to hybrid access mode.

Instructions: Accept the default, No, if you want the VC to work in group access mode only.

Set to Yes if you want the VC to operate as a hybrid VC.

For more information about the group and hybrid access modes, see Configuring

ATM Services.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.5.1.25

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 80