Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 60)

Configuring ATM Half-Bridge Services

A-4

308611-14.00 Rev 00

Parameter: Local Init File

Path: Configuration Manager > Protocols > IP > AHB > Global

Default: None

Options: None

Function: Specifies a local ASCII data file into which you can add bridge table entries for

configuring PVCs on an AHB interface. You create init files locally, but you

must store them on the router’s flash memory card. AHB loads the init files

when the router boots.

Instructions: Specify the name of the init file you want to use. Be sure to copy the file to the

router’s flash memory so the router can boot with this file.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.13.1 #4

Parameter: Alternate Init File

Path: Configuration Manager > Protocols > IP > AHB > Global

Default: None

Options: None

Function: Specifies an alternate init file (backup) as a safeguard in case the local init file

fails to load properly when the router boots.

Instructions: Specify the alternate init file name.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.13.1 #5

Parameter: Debug Level

Path: Configuration Manager > Protocols > IP > AHB > Global

Default: 0

Options: Recommended values are from 1 to 5

Function: Specifies the level of debug messaging you want to display in the log file for

AHB.

Instructions: Enter the debug messaging level you want.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.13.1 #6

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 60